|
|
Broadcast microphone with a condenser capsule and a functionally optimized design, featuring integrated pop protection, suppression of structure-borne noise and a cardioid directional characteristic.
|
|
| Acoustical operating principle |
Pressure gradient transducer |
| Directional pattern |
Cardioid |
| Frequency range |
20 Hz ... 20 kHz |
| Sensitivity at 1 kHz into 1 kohm |
22 mV/Pa |
| Sensitivity at –14 dB attenuation |
4.4 mV/Pa |
| Rated impedance |
50 ohms |
| Rated load impedance |
1 kohms |
| Equivalent noise level, CCIR1) |
18 dB |
| Equivalent noise level, A-weighted1) |
7 dB-A |
| Maximum SPL for THD 0.5%2) |
138 dB |
| Maximum SPL for THD 0.5% with preattenuation2) |
152 dB |
| Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) |
76 dB |
| Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) |
87 dB |
| Maximum output voltage |
10 dBu |
| Dynamic range of the microphone amplifier (A-weighted) |
131 dB |
| Supply voltage (P48, IEC 61938) |
48 V ± 4 V |
| Current consumption (P48, IEC 61938) |
3.2 mA |
| Matching connector |
XLR3F |
| Weight |
500 g |
| Diameter |
64 mm |
| Length |
85 mm |
| Height (without suspension) |
110 mm |
|
______________________________________________
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal |
|
|
|
Microphone Finder
