|
|
Long version of the classic shotgun mic, with switchable high-pass and low-pass filter. Excellent off-axis (lateral and rear) attenuation. Free of coloration.
|
|
| Acoustical operating principle |
Interference transducer |
| Directional pattern |
Supercardioid/lobe |
| Frequency range |
20 Hz ... 20 kHz |
| Sensitivity at 1 kHz into 1 kohm |
21 mV/Pa |
| Rated impedance |
150 ohms |
| Rated load impedance |
1 kohms |
| Equivalent noise level, CCIR1) |
23 dB |
| Equivalent noise level, A-weighted1) |
12 dB-A |
| Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) |
71 dB |
| Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) |
82 dB |
| Maximum SPL for THD 0.5%2) |
128 dB |
| Maximum output voltage |
2.6 dBu |
| Dynamic range of the microphone amplifier (A-weighted) |
116 dB |
| Supply voltage (P48, IEC 61938) |
48 V ± 4 V |
| Current consumption (P48, IEC 61938) |
0.7 mA |
| Matching connector |
XLR3F |
| Weight |
250 g |
| Diameter |
21 mm |
| Length |
395 mm |
|
______________________________________________
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal |
|
|
|
Microphone Finder
