KMS 105 D digital vocal microphone: Detail view

By Requirement Profile:
By Type:
Digital microphone technology on stage. The sound of the Neumann vocalist microphones connecting to AES 42, AES/EBU and S/PDIF.
Zoom: KMS 104 D und KMS 105 D digitale vocal microphones
Specifications KMS 104 D / KMS 105 D
Acoustic transducer: Pressure gradient transducer
Directional characteristic: Cardioid/Supercardioid

Frequency response: 60 Hz to 20 kHz
Free-field sensitivity1):–47 dBFS
Equivalent noise level, CCIR3): 27 dB
Equivalent noise level, A-weighted3): 16 dB-A
Signal-to-noise ratio2), CCIR3): 67 dB
Signal-to-noise ratio2), A-weighted3): 78 dB
Maximum SPL at 0 dBFS: 141 dBSPL
Dynamic range, A-weighted4): 125 dB

Latency:
44,1/48 kHz: 41 samples
88,2/96 kHz: 49 samples
176,4/192 kHz: 99 samples

Preset:
- Sampling rates: 48 kHz
- Gain: 10 dB (variable with DMI-2)
- Compressor on, Attack time 100 ms, Release time 0.5 s,
Threshold –10 dBFS, Ratio 2:1

Supply voltage range: +6 V to +10.5 V
Current consumption: max. 150 mA
Weight: approx. 300 g, Diameter: 48 mm, Length: 180 mm
General Specifications of the Solution-D microphones
Interface: AES42

Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Sampling rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download

A/D conversion: Neumann process (patented),
28-bit internal word length

Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits

Synchronization:
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2),
pulling range: Min. ± 100 ppm

Power supply (phantom power complying with AES42)

Output: XLR3M, 24 bits as per AES/EBU (AES3)
________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1;
CCIR-weighting according to CCIR 468-3, quasi peak;
A-weighting according to IEC 61672-1, RMS
4) D-01 only





Pour l'instant, seules quelques parties de ce site Web sont traduites en français. Dès qu'un contenu n'est pas disponible en français, c'est la version anglaise du texte qui est affichée.