|
|
In a word: The Neumann classic. Three directional characteristics and switchable pre-attenuation ensure suitability for a wide range of applications.
|
|
| Acoustical operating principle |
Pressure gradient transducer |
| Directional pattern |
Omnidirectional, cardioid, figure-8 plus |
| Frequency range |
20 Hz ... 20 kHz |
| Sensitivity at 1 kHz into 1 kohm |
20/28/22 mV/Pa1) |
| Rated impedance |
200 ohms |
| Rated load impedance |
1 kohms |
| Equivalent noise level, CCIR2) |
26/23/25 dB1) |
| Equivalent noise level, A-weighted2) |
15/12/14 dB-A1) |
| Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) |
68/71/69 dB1) |
| Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) |
79/82/80 dB1) |
| Maximum SPL for THD 0.5%3) |
117 dB (cardioid) |
| Maximum SPL for THD 0.5% with preattenuation3) |
127 dB |
| Maximum output voltage |
390 mV |
| Dynamic range of the microphone amplifier (A-weighted) |
105 dB |
| Supply voltage (P48, IEC 61938) |
48 V ± 4 V |
| Current consumption (P48, IEC 61938) |
0.8 mA |
| Matching connectors |
XLR3F |
| Weight |
500 g |
| Diameter |
56 mm |
| Length |
200 mm |
|
______________________________________________
1)Omnidirectional / cardioid / figure-8
2) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
3) measured as equivalent el. input signal |
|
|
|
Microphone Finder
