www.neumann.com
Forums:
Email:









Forums / Other Topics / Thread
Re: Neutrik EMC with starquad cable. (and Gotham gac3)
Author: Giacomo
Date: 07/12/2012
I would like to buy Gotham GAC3, the question is the same. With Canare I've not soldering the shield, but only lean on the connector shell. The connecor shell isn't solid but split, how can I use the EMC connector with GAC3 ? I dont like lean the shield, would be better to solder the screen too. Neutrik says that only the foil must be soldered.

http://www.rane.com/n165fig8.jpg (EMC Neutrik)

http://www.gpanagopoulos.com/eshop/image s/detailed_images/xlr-emc-assembly.jpg (EMC assembly)


For neutrik EMC it makes sense to connect only the pin, without connecting the shield to the connector shell ?

I've also found this, but I don't understand.

http://www.neutrik.com/zoolu-website/med ia/document/6960/Typlical+Applications+E MC+XLR  
 
Reply
Giacomo
01/09/2012
Uwe Sattler/NeumannUSA
01/09/2012
Klaus Heyne
01/11/2012
Uwe Sattler/NeumannUSA
01/11/2012
Giacomo
07/12/2012
John Willett
07/14/2012
Martin Schneider/Neumann
07/16/2012
Giacomo
07/17/2012
Martin Schneider/Neumann
07/20/2012
Giacomo
07/29/2012
Martin Schneider/Neumann
07/30/2012
Giacomo
07/30/2012
Martin Schneider/Neumann
07/31/2012