www.neumann.com
Forums:
Email:









Re: Valve U47 standmount thread adapter to 3/8 inch.
Author: John Willett
Date: 01/24/2012
Hi Gwyn,

From what you say - that a normal 5/8" to 3/8" won't work - suggests to me that the thread adaptor is actually still in there buy it has been turned around so that the 1/2" thread end is facing out rather than the 3/8" end.

Neumann use a dual adaptor as some Neumann stands (and some K&M stands) use a 1/2" thread. So Neumann use an adaptor with a 5/8" outside and a 1/2" inner thread at one end and a 3/8" thread at the other and you just unscrew the adaptor and turn it over.

Has this happened?

John Willett
Circle Sound Services  
 
Reply