www.neumann.com
Forums:
Email:









Re: U-67 cable and conectors
Author: Uwe Sattler/NeumannUSA
Date: 07/02/2012
You can get suitable connectors for the U 67 from Binder connectors in their Series 691, also known as M25 connectors. Chedk out this link:
http://www.binder-connector.de/en/produc ts
The male cable plug is 09-0041 00 07, the corresponding cable female is 09-0042 00 07, and the matching panel mounts are 09-0043 00 07 (male) and 09-0044 00 07 (female) respectively.
You will need to slightly modify either of these parts by filing a key notch adjacent to pin 1. By default the notch is located 30 degrees off between pins 6 and 1.  
 
Reply
Miroslav Lesic
06/30/2012
Uwe Sattler/NeumannUSA
07/02/2012
Klaus Heyne
07/03/2012
Martin Schneider/Neumann
07/03/2012
Klaus Heyne
07/03/2012