www.neumann.com
Forums:
Email:









Re: Schematic for the NKMa psu + KM56 microphone
Author: Martin Davies
Date: 08/07/2017
Hi Klaus

This time the noise cleared up in under 3 minutes.

Sample link here. https://drive.google.com/open?id=0ByMXqT JH1cS4ejRuUWotOUFCMW8

Background noise is due to it being recorded in a noisy workshop with the same setup as before.

The last time I used the mic it look hours to become clean.

I would be interested to find out if there is a way to fix the mic or just use it till the tube goes - but then what?

Thanks

Martin  
 
Reply
Bjorn Andersson
02/05/2008
Martin Schneider/Neumann
02/05/2008
  sent 
Martin Schneider/Neumann
02/08/2008
Bjorn Andersson
02/08/2008
Martin Schneider/Neumann
02/08/2008
Rafael Abal
09/09/2013
Uwe Sattler/NeumannUSA
09/11/2013
Rafael Abal
07/07/2014
Martin Schneider/Neumann
07/08/2014
Uwe Sattler/NeumannUSA
07/08/2014
Rafael Abal
07/09/2014
Rafael Abal
07/09/2014
Uwe Sattler
07/10/2014
Martin Schneider/Neumann
07/10/2014
Ray Marin
11/07/2015
Uwe Sattler
11/08/2015
Francisco Miranda
01/06/2016
Uwe Sattler
01/06/2016
Martin Davies
09/27/2016
Uwe Sattler
09/28/2016
Martin Davies
08/05/2017
Klaus Heyne
08/05/2017
Martin Davies
08/06/2017
Martin Davies
08/07/2017
Klaus Heyne
08/07/2017
Martin Davies
08/07/2017
Martin Davies
08/07/2017
Klaus Heyne
08/07/2017
Martin Davies
08/08/2017
Uwe Sattler
08/08/2017
Martin Davies
08/08/2017