Pro Tools DigiLink I/O Card

PT64V3

Name: PT64V3
Brand: Neumann
SKU: 700704

The PT64V3 card for Hapi Mk III connects a Pro Tools HDX system to a RAVENNA/AES67 or DANTE network.

PT64V3

We need your consent to display this content

By clicking on "Accept" you agree to the data processing to. Further information on data processing can be found under "More information".

DESCRIPTION

The Merging Technologies PT64V3 expansion card enables connectivity of a Pro Tools HDX system to a Merging Technologies Hapi Mk III, allowing low latency connection from Pro Tools to a RAVENNA/AES67 or DANTE network.

The PT64V3 card is the best way to use Merging Technologies and Neumann’s pristine preamps, AD and DA, to record and playback to and from a Pro Tools HDX system.
It also allows to connect a Pro Tools HDX system to the various “Missions” running on a Neumann MT 48 or Merging Technologies Anubis, for the best control room monitoring solution, personal cue mixes and so much more.

A single PT64V3 card can connect to an HDX card via two DigiLink Mini connectors, to send and receive:

64 channels @ 48 kHz
32 channels @ 96 kHz
16 channels @ 192 kHz

Notes:

In Dante mode, Hapi Mk III can run a maximum of 64 channels to and from the network (with the correct Audinate I/O license), meaning only one PT64 card can be routed to/from the network.
PT64V3 card is also compatible with the Hapi Mk II.
PT64V3 card also supports HD Native and HD Native Thunderbolt
HDX systems running Pro Tools versions older than 2022.4, also require a DigiLink I/O license to connect to the PT64V3 card.

Two PT64V3 cards can be fitted in a single Hapi Mk III for up to 128 channels to and from an HDX2 system.
Two Hapi Mk III equipped with a total of three PT64V3 cards can interface with an HDX3 system for up to 192 DigiLink I/O to the network.

A Hapi Mk III can also be fitted with one PT64V3 card and a MADI128V3 card while still running the built in 8 AES3 channels and 8 ADAT channels bringing the maximum number of outputs to the network to 208 or 210 inputs from the network in Ravenna/ AES67 mode.

PT64V3 card can emulate HD I/O, HD MADI and 192 I/O hardware latencies in order for Pro Tools to correctly compensate for hardware delay after recording passes and help maintain mixed configurations in sync.