Dual channel microphone preamp

Suited for:
Frequency Range | <10 Hz to >100 kHz (-3 dB@ 40 dB Gain) |
---|---|
Mains Power Supply: Input Voltage; frequency | 100-120 V and 220-240 V; 50 Hz/60 Hz |
Power Consumption | max. 25 W |
Microphone Inputs: Connector | 2 x XLR 3 F |
Microphone Inputs: Input Impedance | approx. 3 kΩ |
Microphone Inputs: Minimum Gain | +20 dB (PAD off) |
Microphone Inputs: Maximum Gain | +60 dB (PAD off) |
Microphone Inputs: Attenuation PAD switchable | off/-20 dB |
Microphone Inputs: Maximum Input Level (PAD off) | +8 dBu |
Microphone Inputs: Maximum Input Level (PAD on) | +28 dBu |
Microphone inputs: EIN @ 60 dB Gain / 50 Ohm¹⁾ | -129,4 dBu(A) |
Microphone inputs: EIN @ 40 dB Gain / 50 Ohm¹⁾ | -129,2 dBu(A) |
Microphone inputs: THD Mic In @ 1kHz /40 dB Gain / +12 dBu²⁾ | 0,00018% |
Power Supply (P48, IEC 61938) | 48 V, max. ≥ 10 mA, switchable on/off |
Hi-Z Inputs: Active | switchable on/off |
Hi-Z Inputs: Connector | 2 x Jack 6.3 mm (1/4”), mono, unbalanced (front) |
Hi-Z Inputs: Input Impedance | 3.3 MΩ |
Hi-Z Inputs: Maximum Input Level | +21 dBu |
Hi-Z Inputs: Minimum Gain | 0 dB (PAD off) |
Hi-Z Inputs: Maximum Gain | +40 dB (PAD off) |
Bargraphs per Channel | -24 dBu to +24 dBu in 6 dB steps |
Bargraphs Peak Hold | indication @ +24 dBu (hold time approx. 3 sec.) |
Headphone Output: Mono/Stereo | switchable |
Headphone Output: Connector | jack 6.3 mm (1/4”), stereo (front) |
Headphone Output: Volume Control | for left & right channel + Master |
Headphone Output: Output Impedance | approx. 2 Ω |
Headphone Output: Maximum Output Level | +20 dBu into 150 Ω load impedance |
Outputs: Connector | 2 x XLR 3 M |
Outputs: Output Impedance | approx. 200 Ω |
Outputs: Maximum Output Level | +26 dBu into 1 kΩ load impedance |
High Pass Filter | 60 Hz, 12 dB/oct, switchable on /off |
Product Dimensions (height x width x depth) | 89mm x 483 mm x 242 mm |
Weight | 6.2 kg |
Operating Conditions | 0°C to +50°C; < 75% RH@ +40°C; non-condensing |
Transport/Storage Conditions | -25°C to +70°C; < 95% RH; non-condensing |
Working Altitude | < 2000 m |
Ground Lift | switchable on/off |
1) Typical output impedance of Neumann condenser microphones (typical value)
2) Typical
Color nickel
CAT. NO. 008682
Suited for:
So good! The Neumann V402!
Riffs, Beards & Gear
Youtube Video
V 402 Video Review, English
Meghdeep Bose
Youtube Video
Review: Neumann V 402, English
www.mixonline.com
Link
V 402 demo and review
Alec Brits
Youtube Video
Neumann V 402 review (English)
Sound & Recording 4/2020
Download PDF
Neumann V 402 Microphone Preamp Demo
Sweetwater
Youtube Video
Neumann V 402 review (German)
Bonedo.de
Link
Neumann V 402 review (German)
Sound & Recording 4/2020
Download PDF
Test: Neumann V 402, 2-Kanal Mikrofonvorverstärker (German only)
Amazona.de
Link
WARNING (for California residents only): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects and other reproductive harm. For more information go to: www.p65warnings.ca.gov.