The ADA8V3S is a complex input and output card for the Merging audio mainframe Hapi Mk III. With eight inputs and eight outputs, it offers two-way audio conversion: analog to digital and digital to analog.
These remote controlled Mic/Line Input and Output cards feature 3rd generation Dual Gain topology, inspired by the exceptional Anubis preamps, for highest audio quality without compromise.
With two ADA8V3S 8-channel Mic/Line In and Line Out Cards you can configure Hapi Mk III for up to 16 analog I/O channels.
The ADA8V3S supports sample rates of up to 192 kHz.
These remote controlled Mic/Line Input and Output cards feature 3rd generation Dual Gain topology, inspired by the exceptional Anubis preamps, for highest audio quality without compromise.
With two ADA8V3S 8-channel Mic/Line In and Line Out Cards you can configure Hapi Mk III for up to 16 analog I/O channels.
The ADA8V3S supports sample rates of up to 192 kHz.
Features:
- 8 exceptionally transparent, Swiss designed preamplifiers plus 8 outputs
- Dynamic range of 139 dB (A-weighted, typ.) on the line inputs
- Preamps offer up to 78 dB of gain (with Boost)
- Full remote access for all parameter changes
- Dynamic range of 124 dB (A-weighted, typ.) on the line outputs
- Phantom power/polarity invert/low cut/impedance switchable per channel
- Switch to line level on a per channel basis via display or remotely via browser
- Auto-mute circuitry for “no-pop” power cycling
- Digitally controlled output trims for line-up procedures
- 2x 25-pin Sub D connector
- Sample rates up to 192 kHz
| Mic Pre-Amp + ADC Section | |
|---|---|
| Mic Pre Max Input (Mic+Pad / Mic / Mic Boost) | +24 dBu / +12 dBu / +0 dBu |
| Input Impedance (Differential, Software Switchable Per Channel) | 3 kΩ / 10.4 kΩ |
| Frequency response +0/-0.3dB @ fs = 48 kHz | 9 Hz – 22 kHz |
| Frequency response +0/-0.3dB @ fs = 96 kHz | 9 Hz – 46 kHz |
| Frequency response +0/-0.3dB @ fs = 192 kHz | 11 Hz – 94 kHz |
| Dynamic Range (A-weighted, typ.), ref +12 dBu | 137 dB |
| Dynamic Range Mic Boost (A-weighted, typ.), ref 0 dBu | 128 dB |
| Gain Range (software controlled) | 0 dB to +66 dB |
| THD+N Pre + A/D (20 Hz - 20 kHz) @ -2 dBFS | < -111 dB (0.00028 %) |
| Interchannel Crosstalk @ 1kHz | < -130 dB |
| EIN @ > 40 dB Gain (150Ω Source Impedance, A-weighted) | < -127 dBu |
| Common Mode Rejection Rate (20 Hz – 20 kHz) | > 75 dB |
| Phantom Power (Software Switchable Per Channel) | +48V |
| Polarity Invert (Software Switchable Per Channel) | YES |
| Low Cut filter (Software Switchable Per Channel) | -12 dB/octave, 80 Hz |
| Line Input | |
| Max Line Input for 0 dBFS | +24 dBu |
| Input Impedance (Differential) | 10.4 kΩ |
| Dynamic Range (A-weighted, typ), ref +24 dBu | 139 dB |
| THD+N Line+A/D (20 Hz - 20 kHz) @ -2 dBFS | < -111 dB (0.00028 %) |
| Interchannel Crosstalk @ 1kHz, typ. | < -135 dB |
| Sensitivity Range for 0 dBFS (software controlled) | -42 dBu to +24 dBu |
| Gain Step | 0.5 dB |
| Common Mode Rejection Rate (20 Hz – 20 kHz) | > 75 dB |
| Connector Pinout | DB-25 / AES59 (Tascam Ana.) |
| Line Output Section | |
| Max Output level software switchable for 0 dBFS | +24 dBu / +18 dBu +0/-0.5 dB |
| Frequency response +0/-0.3dB @ fs = 48 kHz | 0 Hz – 22 kHz |
| Frequency response +0/-3dB @ fs = 96 kHz | 0 Hz – 46 kHz |
| Frequency response +0/-3dB @ fs = 192 kHz | 0 Hz – 92 kHz |
| Output Impedance (Differential) | < 80 Ω |
| Dynamic Range (A-weighted, typ.) | 122 dB / 124 dB |
| THD+N (1 kHz) @ 0dBFS | < -117 dB (0.00014 %) |
| Interchannel Crosstalk @ 1kHz | < -139 dB |
| Connector Pinout | DB-25 / AES59 (Tascam Ana.) |
| Latencies | |
| Input latency at 44.1/48kHz | 8 samples |
| Input latency at 88.2/96kHz | 8 samples |
| Input latency at 176.4/192kHz | 8 samples |
| Output latency at 44.1/48kHz | 9* samples |
| Output latency at 88.2/96kHz | 9* samples |
| Output latency at 176.4/192kHz | 9* samples |
* Filter setting
- Slow Roll Off Filter option = 9 Samples
- Sharp Roll Off Filter option = 38 Samples