Hintergrund Software

Input and Output Card

ADA8V3S

8 Channel Mic/Line A/D and D/A Card for Hapi Mk III

ADA8V3S

We need your consent to display this content

By clicking on "Accept" you agree to the data processing to. Further information on data processing can be found under "More information".

Die ADA8V3S ist eine komplexe Ein- und Ausgangskarte für den Merging Audio Mainframe Hapi Mk III. Mit acht Ein- und acht Ausgängen bietet sie eine Audiowandlung in beide Richtungen: analog zu digital und digital zu analog.
Diese ferngesteuerten Mic/Line-Eingangs- und Ausgangskarten verfügen über eine Dual-Gain-Topologie der dritten Generation, die von den außergewöhnlichen Anubis-Vorverstärkern inspiriert wurde, und bieten höchste Audioqualität ohne Kompromisse.
Mit zwei ADA8V3S 8-Kanal Mic/Line In- und Line Out-Karten kann Hapi Mk III für bis zu 16 analoge I/O-Kanäle konfiguriert werden.
Die ADA8V3S unterstützt Abtastraten bis zu 192 kHz.
 

Features:

  • 8 außergewöhnlich transparente Vorverstärker mit Schweizer Design und 8 Ausgängen
  • Dynamikbereich von 139 dB (A-bewertet, typ.) für die Line-Eingänge
  • Vorverstärker bieten bis zu 78 dB Gain (mit Boost)
  • Vollständiger Fernzugriff für alle Parameteränderungen
  • Dynamikbereich von 124 dB (A-bewertet, typ.) für die Line-Ausgänge
  • Phantomspeisung/Polaritätsumkehrung/Tiefpassfilter/Impedanz pro Kanal schaltbar
  • Umschalten auf Line-Pegel pro Kanal über das Display oder per Fernzugriff über den Browser
  • Automatische Stummschaltung für geräuschloses Ein- und Ausschalten
  • Digital einstellbarer Ouptupt-Trim für Pegelabgleich
  • 2x 25-poliger Sub-D-Anschluss
  • Abtastraten bis zu 192 kHz
 
Mic Pre-Amp + ADC Section
Mic Pre Max Input (Mic+Pad / Mic / Mic Boost) +24 dBu / +12 dBu / +0 dBu
Input Impedance (Differential, Software Switchable Per Channel) 3 kΩ / 10.4 kΩ
Frequency response +0/-0.3dB @ fs = 48 kHz 9 Hz – 22 kHz
Frequency response +0/-0.3dB @ fs = 96 kHz 9 Hz – 46 kHz
Frequency response +0/-0.3dB @ fs = 192 kHz 11 Hz – 94 kHz
Dynamic Range (A-weighted, typ.), ref +12 dBu 137 dB
Dynamic Range Mic Boost (A-weighted, typ.), ref 0 dBu 128 dB
Gain Range (software controlled) 0 dB to +66 dB
THD+N Pre + A/D (20 Hz - 20 kHz) @ -2 dBFS < -111 dB (0.00028 %)
Interchannel Crosstalk @ 1kHz < -130 dB
EIN @ > 40 dB Gain (150Ω Source Impedance, A-weighted) < -127 dBu
Common Mode Rejection Rate (20 Hz – 20 kHz) > 75 dB
Phantom Power (Software Switchable Per Channel) +48V
Polarity Invert (Software Switchable Per Channel) YES
Low Cut filter (Software Switchable Per Channel) -12 dB/octave, 80 Hz
Line Input
Max Line Input for 0 dBFS +24 dBu
Input Impedance (Differential) 10.4 kΩ
Dynamic Range (A-weighted, typ), ref +24 dBu 139 dB
THD+N Line+A/D (20 Hz - 20 kHz) @ -2 dBFS < -111 dB (0.00028 %)
Interchannel Crosstalk @ 1kHz, typ. < -135 dB
Sensitivity Range for 0 dBFS (software controlled) -42 dBu to +24 dBu
Gain Step 0.5 dB
Common Mode Rejection Rate (20 Hz – 20 kHz) > 75 dB
Connector Pinout DB-25 / AES59 (Tascam Ana.)
Line Output Section
Max Output level software switchable for 0 dBFS +24 dBu / +18 dBu +0/-0.5 dB
Frequency response +0/-0.3dB @ fs = 48 kHz 0 Hz – 22 kHz
Frequency response +0/-3dB @ fs = 96 kHz 0 Hz – 46 kHz
Frequency response +0/-3dB @ fs = 192 kHz 0 Hz – 92 kHz
Output Impedance (Differential) < 80 Ω
Dynamic Range (A-weighted, typ.) 122 dB / 124 dB
THD+N (1 kHz) @ 0dBFS < -117 dB (0.00014 %)
Interchannel Crosstalk @ 1kHz < -139 dB
Connector Pinout DB-25 / AES59 (Tascam Ana.)
Latencies
Input latency at 44.1/48kHz 8 samples
Input latency at 88.2/96kHz 8 samples
Input latency at 176.4/192kHz 8 samples
Output latency at 44.1/48kHz 9* samples
Output latency at 88.2/96kHz 9* samples
Output latency at 176.4/192kHz 9* samples

* Filter setting

- Slow Roll Off Filter option = 9 Samples

- Sharp Roll Off Filter option = 38 Samples